It is especially good for shooting on location due to the flash being easily portable. The powerful 600Ws CITI600 TTL flash with a guide number of 87m has a 11.1V / 8700mAh rechargeable Lithium-ion battery pack giving approximately 500 full-powered shots per charge, perfect to keep you going throughout the shoot without the need for mains power.The CITI600 TTL gives you access to TTL automatic metering which will quickly provide you with perfect exposure without the need for manual metering, which could sometimes cause you to miss key moments. Since the CITI600 TTL utilises Insulated-Gate Bipolar Transistor (IGBT) technology, it is capable producing short flash durations of between 1/220 second to 1/10,000 second for sharper images whilst maintaining colour accuracy throughout its power range which opens up a whole world of possibilities.
With an automatic temperature-controlled ventilation system to ensure it is safe and protected when shooting frequently, this means that the cooling fan will kick in to protect the flash when running at high temperatures. The CITI600 TTL has a 600Ws flash tube that has an 9-stop power range (1/1 1/256 power) in 1/3rd stop power increments with super short recycling times between 0.01 and 2.5 seconds and 16 controllable groups and 32 different channels to provide maximum flexibility and control with your flash. It also includes a 10W LED modelling lamp which is equivalent to approximately100W tungsten but runs much cooler for longer usage time. The CITI600 TTLs user-friendly interface, with large Dot-Matrix LCD screen, enables you to quickly and easily change your flash settings with the use of large, easy to access buttons and a control dial.
It features a variety of different flash modes including a High-Speed Sync mode (up to 1/8000 sec) to help overpower the sun, and a multi-flash mode, which can be set to between 2 and 100 flashes at a frequency between 1 and 100Hz (flashes per second), which allows you to create many different effects such as stroboscopic photography. It also features an intelligent slave cell (Pre-flash detector system) cell that can be set to ignore a Pre-Flash, which enables the use of the CITI600 TTL alongside speedlights or any other TTL strobe. The CITI600 TTL features a built-in 2.4GHz flash receiver, which allows it to be used in conjunction with the PIXAPRO 2.4GHz flash Triggers. This allows you to control your flash heads remotely such as flash power settings, Modelling lamp on/off, changing groups & channels and Triggering. Its part of The ONE System, which you can mix and match any PIXAPRO range flash.
The universal flash is compatible with popular camera brands from Canon, Nikon, Sony, Olympus, Fuji, Pentax with full control and even high-end cameras from Hasselblad, Leica and PhaseOne with basic control. It uses an S-Type accessory mount, making it compatible with a wide range of accessories and modifiers. This compact and lightweight flash is perfect for people who shoot weddings, portraits, events, fashion, sports and advertising. It is especially good for shooting on location due to the flash being easily portable with automatic TTL metering.
The PIXAPRO® CITI600 TTL is a simple, easy-to-use battery powered unit which offers many features suitable for both amateur and professional photographers. Due to the battery power and TTL feature, it is the perfect light to give crisp sharp images whilst boasting super-fast recycle times and flash duration to capture motion for use in studio or on location. The Remote head features a 2m extension cable which plugs into the Citi600s flash-tube socket.
The Remote head itself has its own led modelling light, and a Bowens S-Type accessory mount which enables you to mount a wide variety of modifiers that are available on the market with it. The Main body of the CITI600 head can be carried over the shoulder using the included Portable Shoulder Bag for CITI600 when the remote-head is being hand-held by an assistant. The Remote Flash Head for CITI600 is the perfect solution for the photographer who require their lights to be hand-held by an assistant, or needs their light on a boom. Integrated PIXAPRO 2.4GHz ST-III Radio Transceiver System for full TTL metering.
Utilises IGBT technology for Super-Short Flash Durations, great for freezing motion. High Speed Sync mode up to 1/8000th. High Guide Number of GN87 (at ISO 100 with Standard Reflector). Large Dot Matrix LCD Display.500 Full Power Flashes (With PowerPack Dual Output). Super-quick Recycle Times of between 0.01 2.5 Seconds.
Remote Head enables you to separate the head from the main body like a pack and head flash system. Remote Head features its own LED modelling Lamp and S-Type Mount.This product is provided with a UK 3-Pin Power cable, if you require an EU power cable please notify us when purchasing your item. CITI600 TTL With Remote Head.
0.01 - 2.5 Seconds Recycle Time. 1/1 - 1/256 (1/3 Stop Increments).Built in (removable) 11.1V / 8700mAh Lithium-ion Battery. 500 Full Powered Flashes Per Charge. ETTL/ITTL / M / Multi. Flash Exposure Bracketing / Flash Exposure Compensation. ±3 Stops (1/3 Stop Increments). 2.4GHz (Compatible with PIXAPRO PRO ST-III TTL Triggers). ETTL & ITTL Radio Slave Modes. 100m with ST-III Transmitter in Open Area. Canon & Nikon Optical Slave Modes, Manual Slave Modes, S1 & S2. PC Sync Port, 3.5mm Sync port, USB port for Pro AC Trigger Set (Manual Flash Support Only). 220mm x 245mm x 125mm. The item "Portable Flash Strobe Remote Extension Head Kit Photography Lighting AD600B TTL" is in sale since Wednesday, May 16, 2018.
This item is in the category "Cameras & Photography\Lighting & Studio\Flash Lighting\Flash Heads". The seller is "tsl-2009" and is located in Brierley Hill.This item can be shipped to all countries in Europe.