Portable Bare bulb Flash Godox AD360II-C TTL HSS Portable Flash Battery Strobe

  
PIXAPRO® HYBRID360 ETTL TTL Portable Bare Bulb Flash (FOR CANON). The PIXAPRO HYBRID360 ETTL (Godox Wistro AD360II-C) is an ETTL II compatible Portable Bare bulb Flash, which gives you access to powerful flash with a guide number of 80m at ISO100 with the standard reflector attached (which is a similar to some studio strobes), but with the size and portability similar to that of a speedlite. It is powered by a Pixapro PowerPack Dual Output battery pack, which will give you approximately 450 full-powered shots per charge, and recycling times of between 0.05 and 4.5 seconds. It features a user-friendly interface, with a large Dot-Matrix LCD screen with large, easy to access buttons and a control dial, which allows you to quickly and easily adjust your flash settings.

The PIXAPRO HYBRID360 ETTL Bare bulb Flash with flash durations between 1/220 second to 1/10,000 second (dependant on flash power output) which opens up a whole world of possibilities. The PIXAPRO HYBRID360 ETTL Bare bulb Flash also features a variety of different flash including a High-Speed Sync mode (up to 1/8000 sec), Second-Curtain Sync, Flash-Exposure Compensation, and Flash Exposure Bracketing (up to ±3 stops). It also includes a multi-flash mode, which can be set to between 2 and 100 flashes at a frequency between 1 and 199Hz (flashes per second), which allows you to create many different effects such as stroboscopic photography. The PIXAPRO HYBRID360 ETTL Bare bulb Flash features an integrated 2.4 GHz radio transceiver that can be used to command other Hybrid360 ETTL flashes, as well as Hybrid360 ITTL flashes off camera. Both the Hybrid360 ETTL and the Hybrid360 ITTL feature each others receiver technology, and will automatically switch between the two, depending on which Master flash the signal is received from.

It can also be used in conjunction with the ST-III TTL-C flash triggers which will extend its range from the already impressive 70m to up to a working range of 100m in an open area. This will also be compatible with ST-III, ST-IV, ECO 2.4. The PIXAPRO HYBRID360 ETTL Bare bulb Flash also features Canons Optical Wireless Master & Slave Modes.

The PIXAPRO HYBRID360 ETTL Bare bulb Flash is also compatible with the PIXAPRO® ST-I 16 Channel Radio Speedlite Trigger set, allowing you to trigger your flash, and control the flash power remotely from the transmitter, (Pro ST-I Trigger does not transmit TTL information) enabling you to use the PIXAPRO HYBRID360 ETTL in conjunction with the flashes in the Pixapro Eco-System including the PowerCore Portable Flashes, the Li-Ion580 series speedlites, and the Lumi, Storm and Kino studio strobes. The Hybrid360TTLs hot-shoe can be swapped out for a standard ¼ thread when being used off camera, enabling you to mount to any tripod, light stand or boom arm without the need for added accessories.

The PIXAPRO HYBRID360 ETTL Bare bulb Flash is perfect for the both amateur and professional photographer that needs the portability and convenience of a TTL speedlite, with the power similar to that of a Studio Strobe. High Speed Sync (HSS) Mode enables your flash to sync at higher shutter-speeds than normal (With shutter speeds up to 1/8000 of a second). High Guide Number of GN80 (at ISO 100 with Standard Reflector). High Speed Sync mode up to 1/8000th.

Comes with an adapter to enable you to switch out the hot shoe for a 1/4inch thread when used off camera. Integrated PIXAPRO 2.4GHz ST-III Radio Transceiver System. ETTL & ITTL Radio Slave Mode (Auto Switching). Range 70m+ working range (extended to 100m with ST-III as commander).

Canon Optic Wireless Mater & Slave Modes. Large Dot Matrix LCD Display. 450 Full Power Flashes (With PowerPack Dual Output). 0.05 4.5 Second Recycle Time (Halved With 2 Into 1 Battery Cord).

This product is provided with a UK 3-Pin Power cable, if you require an EU power cable please notify us when purchasing your item. 0.05-4.5s (with PowerPack Dual Output). 1/220 to 1/10,000 sec. 8 Stops in 1/3 stop increments (1/1 to 1/128 power). Up to 100 times, 199Hz. First Curtain Sync / Second Curtain Sync. FEB: ±3 stops in 1/3 stop increments.

PowerPack Dual Output lithium power pack. Hot-shoe, 3.5mm sync cable, PC sync socket, Wireless control port.

3 (A, B, and C). 3m; Slave (receiver): Indoors: 12 to 15 m/ 39.4 to 49.2 ft. Outdoors: 8 to 10 m/ 26.2 to 32.8ft. Master unit reception angle:±40° ; horizontally, ±30° vertically.

2.4GHz Radio Transmission Range. 70m (HYBRID360 ETTL as a transmitter) 100m (PRO ST-III C / PRO ST-III N as a transmitter). Number of Channels (2.4GHz Radio). Fired by Camera's Depth of Field Preview Button.

75mm x 95mm x 220mm (Without Reflector & Flash Tube). 800g (Without Reflector & Flash Tube). The item "Portable Bare bulb Flash Godox AD360II-C TTL HSS Portable Flash Battery Strobe" is in sale since Thursday, January 7, 2016.

This item is in the category "Cameras & Photography\Lighting & Studio\Flash Lighting\Flash Heads". The seller is "tsl-2009" and is located in Oldbury. This item can be shipped to North, South, or Latin America, all countries in Europe. Power (Ws): 360WS

Features: HSS

Bundled Items: Battery Pack

Guide number GN: 80

Recycling Time: 0.05-4.5S

Power Output: 1/1 - 1/128

HSS: Up to 1/8000 sec

Type: Bare Bulb Flash

MPN: A-030302

Manufacturer warranty: 2 years

Trigger: Built in receiver

Brand: PiXAPRO