Strobe Flash Light

NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon


NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon
NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon
NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon
NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon
NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon
NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon
NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon
NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon

NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon   NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon

NICEFOTO HS-400C portable Battery-Powered High Speed Flash Head 400Ws - 1/8000s. NICEFOTO HS-400C portable Battery-Powered High Speed Flash Head 400Ws - 1/8000s for Canon.

HSS 1/8,000s with Canon Cameras. Bowens S-Type Mount fits many Light Modifier. Built-in Radio Receiver (Range 100m). 3 Groups and 7 Channel. Power variable from 1/64 to Full.

LED Modeling Light with Power Saving. Often, high-speed Flash Heads, which can realize extremely short flash duration, get mixed up with HSS (High-Speed Sync) or Super-Sync function. In our assortment you will find both versions: both flash trigger that enable Super-Sync function and also high-speed Flash Heads with extremely short flash duration of up to 1/11,000 seconds. Extremely portable and featuring a 2.4 GHz power control wireless receiver, the NICEFOTO Battery-Powered HS Flash Head is a 400Ws strobe that can be taken on-location without the need for any cords.

It uses a rechargeable Li-ion battery which can provide up to 600 full-power flashes on a single charge. Also, users can adjust the power in 1/10-stop increments through a 7-stop power range and it has a recycle time of about 5 seconds. A built-in optical slave contributes to the wireless convenience by triggering upon the firing of other strobes. 7 Stops in 1/10-Stop Increments.

2.4 GHz Power Control. DC12V 6600mAh Li-Ionen; optional AC 100-240V Power Adapter. 0,1 to 5.5s.

Automatic Modeling Light Energy Saving. 1 x NICEFOTO HS-400C Battery-Powered High Speed Flash Head for Canon. 1 x Reflector Diffusor, white. 1 x Lithium-Ion Battery 12V-6600mAh.

Your advantage at a glance. 14 days right to return. Reliable service in case of support. For your safety we grant you the right to return of 14 days.

Please refer to the cancellation terms and conditions below for further details. For consumers in the EU there is an online dispute resolution (OS) platform at. The logos shown (PhotaREX) and product names (Photarex) on the product pages are registered trademarks and therefore the property of Photoshop Becker.

The information, images, logos, trademarks and other data on the Photoshop Becker website may not be copied or used without prior written authorisation. More Items from this Category.

NICEFOTO 230V AC Adapter for NICEFOTO Battery P.. NICEFOTO HS-400C portable Battery-Powered High.. NICEFOTO Pro TB-300 Flash Head Monolight Strobe.. NICEFOTO Pro TB-600 Flash Head Monolight Strobe.. NICEFOTO Pro TB-400 Flash Head Monolight Strobe.. Der nachfolgende Hinweis richtet sich an diejenigen, die Batterien oder Akkus oder Produkte mit eingebauten Batterien oder Akkus nutzen und in der an sie gelieferten Form nicht mehr weiterveräußern (Endnutzer): 1. Unentgeltliche Rücknahme von Altbatterien und Altakkus: Batterien und Akkus dürfen nicht über den Hausmüll entsorgt werden.

Sie sind zur Rückgabe von Altbatterien und Altakkus gesetzlich verpflichtet, damit eine fachgerechte Entsorgung gewährleistet werden kann. Sie können Altbatterien und Altakkus an einer kommunalen Sammelstelle oder im Handel vor Ort abgeben.

Auch wir sind als Vertreiber von Batterien und Akkus zur Rücknahme von Altbatterien und Altakkus verpflichtet, wobei sich unsere Rücknahmeverpflichtung auf Altbatterien und Altakkus der Art beschränkt, die wir als Neubatterien und Neuakkus in unserem Sortiment führen oder geführt haben. Altbatterien und Altakkus vorgenannter Art können Sie daher entweder ausreichend frankiert an uns zurücksenden oder sie direkt bei uns unter der folgenden Adresse unentgeltlich abgeben: Photoshop Becker Breslauer Str. 2c D-65307 Bad Schwalbach 2. Bedeutung der Batteriesymbole Batterien und Akkus sind mit dem Symbol einer durchgekreuzten Mülltonne s. Dieses Symbol weist darauf hin, dass Batterien und Akkus nicht in den Hausmüll gegeben werden dürfen.

Bei Batterien und Akkus, die mehr als 0,0005 Masseprozent Quecksilber, mehr als 0,002 Masseprozent Cadmium oder mehr als 0,004 Masseprozent Blei enthalten, befindet sich unter dem Mülltonnen-Symbol die chemische Bezeichnung des jeweils eingesetzten Schadstoffes dabei steht "Cd" für Cadmium, "Pb" steht für Blei, und "Hg" für Quecksilber. Was bei Lampenbruch zu tun ist Energiesparlampen enthalten eine sehr geringe Menge an Quecksilber.

Aber es gilt: Bei normaler Anwendung sind Energiesparlampen völlig ungefährlich. Vor, während und nach dem Betrieb kann kein Quecksilber aus der Lampe entweichen. Die einzige Kontaktmöglichkeit ergibt sich, wenn Ihre Sparlampe zerbricht.

In diesem Fall entweicht das Quecksilber langsam in die Luft, da es bei Raumtemperatur verdampft. Die Konzentration ist dabei aber sehr gering und liegt deutlich unterhalb der in Deutschland geltenden Grenzwerte. Für zerbrochene Sparlampen gelten wie für intakte oder nicht länger funktionsfähige Energiesparlampen auch spezielle Empfehlungen zur Entsorgung. Beachten Sie daher bitte folgende Hinweise: Was Sie tun sollten. Wenn die Lampe in einer Leuchte zerbrochen ist, trennen Sie zuerst die Leuchte vom Stromnetz, um Stromschläge zu vermeiden.

Stoßlüften Sie den Raum für 10 15 Minuten und verlassen Sie diesen. Schneiden Sie sich nicht an den Glasscherben. Tipp: ziehen Sie Einweg- oder Haushaltshandschuhe an. Sammeln Sie alle Teile der Lampe auf, möglichst durch Aufkehren.

Nutzen Sie ein angefeuchtetes Einweg-Haushaltstuch oder auch ein Klebeband, um kleine Stücke und Staub aufzunehmen. Wenn die Oberfläche keine andere Wahl lässt (Teppich), verwenden Sie einen Staubsauger. Entsorgen Sie den Staubsaugerbeutel bzw.

Verpacken Sie Lampenreste, Einwegtuch, usw. In einen festverschließbaren Plastikbeutel oder ein Schraubglas. Entsorgen Sie sowohl zerbrochene als auch nicht-funktionsfähige Lampen bei der nächsten Altlampen-Annahmestelle. Was Sie wissen müssen: Das Einatmen von Quecksilberdampf ist die häufigste Aufnahmeart von Quecksilber in den Körper. Sie haben aber Zeit genug, alles in Ruhe zu reinigen, denn bei Raumtemperatur verdampft flüssiges Quecksilber nur sehr langsam.

Bei einer zerbrochenen Lampe kann das Quecksilber an den Bruchstücken haften und über die Zeit in der Wohnung verdampfen. Das können Sie durch die oben genannten einfachen Maßnahmen verhindern. Wenn Sie die Lampenbruchstücke sorgfältig aufnehmen, in einem Plastikbeutel dicht verschließen und bis zur Entsorgung außerhalb Ihrer Wohnung lagern, ist das Quecksilber nicht im Raum. Wie Sie Lampenbruch vermeiden können: Egal ob Glüh-, Halogen- oder Energiesparlampe der Bruch einer Lampe lässt sich nie ganz ausschließen. Vor allem beim Auswechseln der Lampe kann es zu Glasbruch kommen. Folgende Tipps sollen helfen, Missgeschicke zu vermeiden. Stellen Sie um Stromschläge zu verhindern beim Lampenwechsel unbedingt sicher, dass die Leuchte vom Stromnetz getrennt ist. Wechseln Sie die Lampe erst, wenn sie abgekühlt ist.

Wickeln Sie nicht mehr funktionsfähige Lampen bis zur Rückgabe in ein weiches Tuch oder legen Sie sie in einen sicheren Behälter. Nehmen Sie die neue Lampe erst unmittelbar vor dem Eindrehen in die Fassung aus der Verpackung.

Durch den Gehalt geringer Mengen giftigen Quecksilbers dürfen Spiral-Tageslichtlampen gemäß Elektro- und Elektronikgerätegesetz (ElektroG) nicht im Hausmüll entsorgt werden. Entsorgen Sie sowohl zerbrochene als auch nicht funktionsfähige Lampen bei der nächsten Altlampen-Annahmestelle.

The product must already have the error that caused the damage this date. Claims for compensation for consequential damage or product liability exist only in accordance with the statutory provisions. The prerequisite is that the consumer displays the error within two weeks after he has recognized it, or should have recognized it. The costs of repair and replacement of own labor costs.

When replacing the old product is replaced by a new product of the same type, same quality and same type free of charge. If the affected product is no longer produced at the time the error is reported, Photoshop Becker is entitled to supply a similar product. Transport, and / or dispatch to and from Photoshop Becker carries thereby the consumer. Condition for the effectiveness of this guarantee is the proper installation, use and maintenance according to the operating instructions and the recognized rules of technology. Wear parts, such as Rubber coatings and gaskets.

Fragile parts, such as flash tubes, glass, incandescent lamps. Slight deviations of the products from the intended condition, which have no influence on the use value of the product. Improper use, operating and operating errors, damage due to aggressive environmental influences, chemicals, cleaning agents. The validity of the guarantee ends at.

Failure to follow the provided installation, care and use instructions. Installation, maintenance, repair or care by non-expert persons. Damage due to normal wear and tear or deliberate damage - in case of negligent cause of damage a contributory negligence will be credited mutually.

Lack of or faulty maintenance. Products that have not or will not be used for their intended purpose. Damage caused by force majeure or natural disasters, especially, but not limited to floods, fires.

In addition, the consumer must bear the costs, including any labor costs, incurred in the examination of the product, as well as the costs of removal and reinstallation of the product. If the consumer desires to carry out the repair for information about the non-application of the guarantee and the anticipated costs of the repair, he shall bear the cost of replacement parts and labor costs. In this case, the consumer has no legal claim to the elimination of defects. The consumer is entitled to legal rights in addition to the rights under the guarantee. These rights, which may be more favorable to the consumer, are not limited by the guarantee.

This guarantee is subject to German law, excluding the UN Convention on the International Sale of Goods (CISG) of April 11, 1980. Place of performance for the obligations under this guarantee is Bad Schwalbach, Germany.

As far as permissible, the place of jurisdiction is Bad Schwalbach, Germany. The item "NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon" is in sale since Monday, February 15, 2016. This item is in the category "Cameras & Photography\Lighting & Studio\Flash Lighting\Monolight Flashes". The seller is "photoshop-becker" and is located in Bad Schwalbach. This item can be shipped to all countries in Europe.

  1. Bundled Items: Battery Unit
  2. Features: Built-In Slave Cell
  3. Brand: NICEFOTO
  4. Max. Power (Ws): 400
  5. MPN: 10891
  6. Manufacturer Warranty: 1 year
  7. EAN: 4260330285577

NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon   NICEFOTO nFlash HS-400C Battery Powered HSS Studio Flash Strobe for Canon